Being a global best supplier for decades for the marine and oil & gas industry. We aim to supply quality-based ex lighting products which are specifically designed for hazardous location light fixtures which are very well certified and defined for the selected area as per the requirements.
No matter what you called Hazardous Locations or Hazardous Areas or Explosive Atmospheres are all the common names for Ex areas. This is where most likely occur flammable liquids, gases, fumes, or combustible dust. This might be dangerous as it may cause a fire or explosion.
Explosion-proof lighting standards are not the same for all regions of hazardous areas. So, the products designed should be certified by project and regional requirements.
ATEX Ex Proof Lighting Solutions is developed after the experience of many years so that it can be used as per the requirement of projects and regions. We are just a call away, our expert team can guide you completely for your queries.
FSESAFE distributors for Raytec LED Ex-Lighting
Hazardous Area Ex-Lighting
ATEX EX-PROOF LIGHTING
FLOODLIGHTS AND BAY LIGHTS, LINEARS , BULKHEADS , CRANE DECK , CRANE LUMINAIRES
Upgrade existing GRP fluorescent to Bespoke LED Luminaire
FSESAFE Raytec UK LED Ex ATEX Floodlights
LED ATEX Ex Floodlights – Hazardous Area Ex-Lighting – Explosion Proof ATEX EX LED Floodlights Available for : ATEX and IEC Ex rated – Zone 1/21 / Zone 2/22
Lumens:
2500 Lumens; 5000 Lumens ; 10000 Lumens; 15000 Lumens; 20000 Lumens; 25000 Lumens
Rated : IP66 and IP67
LED ATEX Ex Floodlights – Hazardous Area Ex-Lighting – Explosion Proof ATEX EX LED Linears Available for : ATEX and IEC Ex rated – Zone 1/21 / Zone 2/22
Lumens:
Up To 3499 Lumens; 3500 – 6999 Lumens Available in Standard and Emergency Battery variant available as well.
Rated : IP66 and IP67
OLD Technology To Replace
Replacements for : 2 x 18W (2ft); 2 x 36W (4ft); 2 x 58W (5ft) Fluorescents
Choice of LED Colours : White-Light; Green (Safety Shower); Amber (Wildlife Friendly); Red (Low Wavelength)
LED ATEX Ex Bulkhead Luminaire – Hazardous Area Ex-Lighting – Explosion Proof ATEX EX LED Linears Available for : ATEX and IEC Ex rated – Zone 1/21 / Zone 2/22
SPARTAN Bulkhead range is designed for hazardous area environments which require high performance, reliable, White-Light illumination.
Lumens: Up To 3499 Lumens
Available in Standard and Emergency Battery variant available as well.
Rated : IP66 and IP67
VARIO Lens Technology – easy modification of beam patterns
SPARTAN Crane range is designed for use on marine/offshore boom cranes where high performance, reliable, White-Light illumination is required for safe crane operations.
LED ATEX Ex Crane – Hazardous Area Ex-Lighting
Explosion Proof ATEX EX LED Crane Lighting Available for :
ATEX and IEC Ex rated – Zone 1/21 / Zone 2/22
EX LED CRANE FLOODLIGHT FOR HAZARDOUS AREA LIGHTING
Lumens: 7000 – 11999 Lumens
Rated : IP66 and IP67
OLD Technology To Replace
Replacements for :
2 x 18W (2ft); 2 x 36W (4ft); 2 x 58W (5ft) Fluorescents
Choice of LED Colours : White-Light. CoolXtrude™ thermal management technology
All electrical equipment certified for hazardous locations can either be certified as explosion-proof or intrinsically safe. The objective is similar, it is designed to avoid igniting the flammable materials. However, the approach is different.
Explosion-proof lights are conceived to resist ignition of the flammable material that happens inside the light itself, whereas intrinsically safe luminaires are conceived to avoid any spark that could ignite the flammable material, to low current.
FSE Safe is a leading supplier for Raytec which is ISO9001 and IS014001 certified. Raytec includes ATEX LIGHTS & IECEX CERTIFIED hazardous area lighting.
All the products of Raytec are specially designed and manufactured in the UK and are ATEX and IEC Ex certified. We assure you the quality based products with a 5-year warranty.
Raytec includes a broad range of hazardous area lighting with SPARTAN Flood, Linear, Bulkhead, Bay, and Crane lighting, meaning there’s a solution for any application.
In Zone 1, ATEX classified the mixture of air of flammable substances in the formation of vapor, gas, or mist as likely to occur occasionally.
In Zone 2, ATEX classified the mixture with air of flammable substances in the formation of vapor, gas, or mist as not likely to occur in normal operation and continues for a short period only.
