HandLamp & Torches
L-5000 Z0
Rechargeable safety handlamp ATEX Z0/20Â
Certified for explosive atmospheres, light, handy and powerful. Swivelling head, digital display and state-of-the-art optics. Â Tailored to thrive in the toughest and most challenging work settings, the L-5000 Z0 (Spot version) delivers a focused light beam with an impressive range. Ideal for search and rescue.
L-5000 Z0 F (Flood version): wide light beam with medium range. Ideal for search and rescue and area lighting.
- Certified for utilization in potentially explosive atmospheres, ATEX ZONE 0/20 approved.
- 2 optics available: Spot and Flood
- 2 x tail beacons-red light
- 2 x signalling function-amber light
- 2 x emergency light
- Digital display with indication in hours and minutes of the autonomy
- Burning time up to 48 hours
- Shoulder strap included
- Magnets at the rear
- NATO stock number (NSN) available
Â
Â
Â
ATEX | II 1G Ex ia IIC T4 Ga | II 1D Ex ia IIIC T135ºC Da |
---|---|
Ingress protection | IP 66 |
Weight | 1,3 Kg (battery included) |
Measures | 260 x 110 x 110 mm |
Lighting source | 500 lumens |
Burning time | MAIN LIGHT: 3 different light settings 6/12/24 hours, AUXILIARY LIGHT: 3 different light settings 12/24/48 hours |
Torch body | Crafted from thermoplastic resin, showcasing exceptional durability against impacts, extreme temperatures, and corrosive substances. |
Button | Two button switches of soft touch material ergonomic and oversized to guarantee easy pushing |
Battery | Rechargeable Li-ion | Voltage: 3,7 V. | 10.000 mAh |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2 or 3 positions |
Â
L-5000 Z1
- Approved for use in potentially explosive atmospheres ATEX ZONE 1/21
- 2 optics available: Spot and Flood
- 2 x tail beacons-red light
- 2 x signalling function-amber light
- 2 x emergency light
- Digital display with indication in hours and minutes of the autonomy
- Burning time up to 48 hours
- Shoulder strap included
- Magnets at the rear
ATEX | II 2G Ex ia IIC T4 Gb | II 2D Ex ia IIIC T135ºC Db |
---|---|
Ingress protection | IP 66 |
Weight | 1,3 Kg (battery included) |
Measures | 260 x 110 x 110 mm |
Lighting source | 500 lumens |
Burning time | MAIN LIGHT: 3 different light settings 6/12/24 hours, AUXILIARY LIGHT: 3 different light settings 12/24/48 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Button | Two button switches of soft touch material ergonomic and oversized to guarantee easy pushing |
Battery | Rechargeable Li-ion | Voltage: 3,7 V. | 10.000 mAh |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2 or 3 positions |
L-3000
Professional safety LED torch ATEX zone 0 with swivelling head
L-3000 torch is a high performance professional safety torch that combines high intensity LEDs, a revolutionary optic, a large digital display and an elegant design. Certified ATEX ZONE 0/2
- 2 LEDs of 150 lumens each in a double optics with different light beams (spot and flood)
- LEDEngine optics with step lighting system to illuminate the path
- Booster function to illuminate long distances with greater penetrating light beamTwo button switches of soft touch material, ergonomic and oversized in order to guarantee easy pushing
- 3 different burning intensities in order to select in every moment the remaining burning time
- Battery level indication in hours and minutes by means of a digital display
- Swivelling head with 3 positions  0º | 45º | 90º
- Easy maintenance
- Stroboscopic function
- Red or yellow cone for signalling available
- Magnet accessory available
- Straight or right angle
- Chargers for 1, 2, 3 or 5 torches
- NATO stock number (NSN) available
SWIVELLING HEAD
0º | 45º | 90º
ATEX | II 1G Ex ia op is IIC T4 Ga | II 1D Ex ia op is IIIC T85ºC Da |
---|---|
Ingress protection | IP 67 |
Measures | Straight: Ø 70 x 225 mm | Right angle: Ø 70x 100 x 185 mm |
Weight | 500 g (battery included) |
Burning time | 5/7.5/10 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | 2 high intensity LEDs with 150 lm. each |
Battery | Rechargeable Li-ion | 3,7 V. |
Button | Two button switches of soft touch material ergonomic and oversized to guarantee easy pushing |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2, 3 or 5 positions |
IL-300
Professional safety torch with swivelling head
IL-300 torch is a high performance professional safety torch that combines high intensity LEDs, a revolutionary optics, a large digital display and an elegant design. Certified ATEX ZONE 1/21.
- 2 LEDs of 135 lumens each in a double optics with different light beams (spot and flood)
- LEDEngine optics with step lighting system
- Booster function to illuminate long distances with greater penetrating light beam
- Two button switches of soft touch material, ergonomic and oversized in order to guarantee easy pushing
- 2 different burning intensities in order to select in every moment the remaining burning time
- Battery level indication in hours and minutes by means of a digital display
- Swivelling head with 3 positions  0º | 45º | 90º
- Neodymium magnet with high pull strength (optional)
- Easy maintenance
- Straight or right angle
- Chargers for 1, 2, 3 or 5 torches
SWIVELLING HEAD
0º | 45º | 90º
ATEX | II 2G Ex ia op is IIB T4 Gb | II 2D Ex ia op is IIIC T85ºC Db |
---|---|
Ingress protection | IP 67 |
Measures | Straight: Ø 70 x 225 mm | Right angle: Ø 70x 100 x 185 mm |
Weight | 500 g (battery included) |
Burning time | 4/8 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | 2 high intensity LEDs with 135 lm. each |
Battery | Rechargeable Li-ion | 3,7 V. |
Button | Two button switches of soft touch material ergonomic and oversized to guarantee easy pushing |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2, 3 or 5 positions |
L-90 / L-90R
- L-90 with 3 AA alkalines (included) L-90R with rechargeable battery Li-Ion / 3,7 V (included)
- LEDEngine optics with 2 LEDs
- Spot, flood and stroboscopic options
- Step Lighting System: a light beam projected directly into the ground to illuminate the path
- BOOSTER function for high penetration
- High and low intensity modes
- Backlit button: indication of the light duration and battery level
- Ring and spring clip in the back
- Neodymium magnet optional
- Photoluminescent bezel optional
- Chargers for 1, 2, 3 or 5 torches
ATEX | II 1G Ex ia IIC T4 Ga | II 2D Ex ib IIIC T135ºC Db | I M1 Ex ia I Ma |
---|---|
Ingress protection | IP 67 |
Measures | 73 x 71 x 158 mm |
Weight | Alkaline model: 340 g (batteries included), Rechargeable model: 300 g (battery included) |
Burning time | L-90: Normal mode: 10 hours / Saving mode: 20 hours, L-90R: Normal mode: 4 hours / Saving mode: 18 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | L-90: High: 250 lm / Saving mode: 80 lm, L-90R: High: 280 lm / Saving mode: 80 lm |
Battery | 3 AA alkaline batteries included, Rechargeable Li-ion | 3,7 V. |
Button | Oversized push button switch, placed on the top to guarantee easy finding and pushing with gloves |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery (rechargeable model) |
Chargers | 1, 2, 3 or 5 positions |
L-30
- Power LEDEngine optics, with a powerful high penetration in smoke spot light and long range
- RED LED: 2 rear flashing beacons for positioning
- Step Lighting System: a light beam projected directly into the ground to illuminate your path
- BOOSTER function: maximum power and penetration
- Indication of the light duration and the battery level
- Low battery warning
- Reflective bands
- Chargers for 1, 2, 3, 4 or 5 torches
- Compatible with ADALIT L-10 chargers
- Firefighting helmet attachment included
ATEX | II 1G Ex ia IIC T4 Ga | II 1D Ex ia IIIC T135ºC Da |
---|---|
Ingress protection | IP 68 |
Measures | 135 x 43 x 55 mm |
Weight | 165 g (battery included) |
Burning time | 3/12 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | 350 lumens |
Battery | Rechargeable Li-ion | 3,7 V. |
Button | Made of soft touch material, it’s placed on the rear to guarantee easy finding and pushing with gloves |
Low Battery Warning | Blinking signal of the active LEDs 15 min. before running out of battery |
Chargers | 1, 2, 3, 4 or 5 positions |
L-10
LED helmet torch with an integrated red beacon
L10 is the first rechargeable torch specifically designed for firefighting helmets, with an integrated red LED beacon to highlight the firefighter position. Ultra light and with a design fully integrated in the intervention helmet. Certified ATEX ZONE 0/20
- White high intensity LED for lighting
- RED LED flashes to highlight the user position (180º rotation)
- Rechargeable li-ion battery
- Indication of the light duration and the battery level
- Low battery warning
- Built-in helmet adapter
- Chargers for 1, 2, 3, 4, 5 or 40 torches
ATEX | II 1G Ex ia op is IIC T4 Ga | II 1D Ex ia op is IIIC T85ºC Da |
---|---|
Ingress protection | IP 65 |
Measures | 156 x 56 x 48 mm |
Weight | 180 g (battery included) |
Burning time | 3/6 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | 135 lumens |
Battery | Rechargeable Li-ion | 3,7 V. |
Button | Oversized push button switch, placed on the side to guarantee easy finding and pushing with gloves |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2, 3, 4, 5 or 40 positions |
L-5+ / L-5R+
2 models available:
L-5+Â with 4 AAA alkalines (included)
L-5R+Â with rechargeable battery Li-Po / 3,7 V (included)
- Includes light sensor for intelligent energy management
- Push button switch of soft touch material, placed on the side to guarantee easy finding and pushing with gloves
- Thermoplastic resin with high resistance to impacts, extreme temperatures and corrosive substances
- Photoluminescent bezel that facilitates its location in case of accidental fall or loss
- Compatible with most firefighter helmets
- 3 chargers available of 1, 3 and 5 positions (Only for L5-R)
- NATO stock number (NSN) available for rechargeable model
ATEX | II 1G Ex ia op is IIC T4 Ga | II 1D Ex ia op is IIIC T85ºC Da |
---|---|
Ingress protection | IP 65 |
Measures | 156 x 56 x 48 mm |
Weight | 180 g (battery included) |
Burning time | 3/6 hours |
Torch body | Thermoplastic resin with high resistance to the impacts, extreme temperatures and corrosive substances |
Lighting source | 135 lumens |
Battery | Rechargeable Li-ion | 3,7 V. |
Button | Oversized push button switch, placed on the side to guarantee easy finding and pushing with gloves |
Low Battery Warning | Blinking signal of the main LED 15 min. before running out of battery |
Chargers | 1, 2, 3, 4, 5 or 40 positions |